User Tools

Site Tools


WiFi Module Client Setup

  • Follow the first time setup guide if you haven't already.
  • On a computer, tablet, or smartphone connect to the USR-WIFI232-T wireless network.
  • On the left hand side navigation click on Other Settings and set the settings as follows:

Baud Rate: As specified in the sketch/example you are using.

Then click the Save halfway down the page – NOT the one at the bottom – and when it asks if you'd like to restart click the back button.

Then set the following settings:

  • Protocol: TCP Client
  • TCP Time Out Setting: 300

And click the Save at the bottom of the page.

  • This time you can hit restart and let the module restart so the settings take effect.

Your Wifi module is now set up and ready for client sketches at the baud rate you selected.

digispark/tutorials/wificlient.txt · Last modified: 2016/06/09 12:03 (external edit)