Req: I2C Controlled Keypad Scan shield please?

[re8]

I found this while researching I2C; it can be useful to me (monome clone, keyboard, etc) & perhaps useful for others?
http://www.ti.com/product/tca8418#feature
+18 GPIOs Can Be Configured into Eight Inputs and Ten Outputs to support an 8 × 10 Keypad Array (80 Buttons)
+10 Byte FIFO to Store 10 Key Presses and Releases
+Minimum Debounce Time of 50 µs

[sparr]

a 5V device would be much easier to integrate into a digispark shield. that\'s a neat device overall, especially the GPIO functionality so that it can be a port expander instead of a keyboard scanner.