« previous next »
Pages: [1]

Author Topic: Tiny85 radio control speed control  (Read 5455 times)

Len Cooper

  • Newbie
  • *
  • Posts: 5
Tiny85 radio control speed control
« on: January 16, 2015, 07:37:53 am »
This may not be the most elegant design but it works. R1 & D3 are not required if the input pulse is  5 volts or less.
« Last Edit: January 18, 2015, 03:27:46 am by Len Cooper »
Logged

RC Navy

  • Jr. Member
  • **
  • Posts: 54
  • When you like, even too much, it is not enough!
Re: Tiny85 radio control speed control
« Reply #1 on: January 16, 2015, 10:11:09 am »
Hi,

the sketch Tiny85_rcu.ino doesn't match with you schematic: it prints hello world from Infra red commands!
Logged

Len Cooper

  • Newbie
  • *
  • Posts: 5
Re: Tiny85 radio control speed control
« Reply #2 on: January 17, 2015, 05:44:14 am »
Thanks for the heads up, some of my files appear to have got moved about.
The correct file has now been attached (I hope!).
Please forgive a novice at this forum business.
Logged

RC Navy

  • Jr. Member
  • **
  • Posts: 54
  • When you like, even too much, it is not enough!
Re: Tiny85 radio control speed control
« Reply #3 on: January 17, 2015, 06:12:18 am »
Hi,
Quote
Please forgive a novice at this forum business.
Never mind: errare humanum est.
Now the sketch is in phase with the schematic, that's important for the forum readers.
Digispark are well dimensioned for such an usage.

Have fun!!!
Logged
Pages: [1]
« previous next »