Schematic of Pro nRF Shield

[mybook4]

Is there a schematic available for the Pro nRF shield?  I may have damaged the shield's board and I would like to implement another board for troubleshooting.

Info about the shield is here (http://digistump.com/wiki/digispark/tutorials/pronrf)

[defragster]

These are usually on product page 'resources' - don't see the pro products there yet.

[digistump]

I've sent one in reply to you email and it is attached to this post as well

[mybook4]

Thanks!

Based on the schematic and board layout, I rebuilt the pro nRF shield on a pro proto shield. 

No short this time, but I ran into the following issue when running the transmitter and receiver sketches provided in http://digistump.com/wiki/digispark/tutorials/pronrf.  Both pin 1 LEDs remain lit steadily.  According to the documentation, this means that the transmitter/receiver are having trouble talking to each other.  I tried powering up first the transmitter, then the receiver.  I also tried powering up first the receiver, then the transmitter.  Neither combination worked.  Next, I'll likely try to use the keyboard library to perform debugging, unless someone has seen something similar before.