oak:tutorials:ultrasonic
This is an old revision of the document!
Table of Contents
Oak: Using an Ultrasonic Sensor
Currently a Work in Progress
]]
In this lesson, we will connect an ultrasonic sensor to the Oak. An ultrasonic sensor allows you to detect
Components
| Part | Quantity | Identification |
|---|---|---|
| Oak with soldered headers | 1 | |
| Breadboard | 1 | |
| Ultrasonic Sensor | 1 | US-100 Y401 |
| Jumper wires | 6 |
Note: The HC-SR04 sensor is NOT being used in this tutorial as it uses 5v. Instead a US-100 sensor, which operates with 3.3v is used.
Particle.publish will be used to send the sensor data to the cloud. To view the data, you will need a free Particle account, which you can get here if you done have one already: https://build.particle.io/signup.
Concepts
Circuit
Code
Conclusion
oak/tutorials/ultrasonic.1469818892.txt.gz · Last modified: 2016/07/29 12:01 by brohan
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 3.0 Unported
