Digistump Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
===== Oak: Using an Ultrasonic Sensor=====

** Currently a Work in Progress **


{{http://digistump.com/wiki/_media/oak/tutorials/us-100_ultrasonic_2.png?300|
{{http://digistump.com/wiki/_media/oak/tutorials/us-100_ultrasonic_2.png?500}}

In this lesson, we will connect an ultrasonic sensor to the Oak. An ultrasonic sensor, using the properties of sound, not only detect an object, but also how far away the object is. The sensor generates a high frequency sound, then listens to the echo received back to the sensor. The time interval from send to receive allows you to calculate the distance.

===== Components =====

^ Part       ^ Quantity          ^Identification^
| Oak with soldered headers |1| |
| Breadboard|1| |
|Ultrasonic Sensor|1|US-100 Y401|
|Jumper wires|6| |


**Note:** The HC-SR04 sensor is __**NOT**__ being used in this tutorial as it uses 5v. Instead a US-100 sensor, which operates from 3v - 5v is used. 

Particle.publish will be used to send the sensor data to the cloud. To view the data, you will need a free Particle account, which you can get here if you done have one already: [[https://build.particle.io/signup]].

===== Concepts =====

=== PulseIn ===

===Particle.publish ===


===== Circuit =====

The US-100 Ultrasonic sensor has a number of configurations available. In this example we will be configuring it for digital output. In order to do so first remove the jumper on the back of the sensor (with the jumper engaged, the sensor will be in analog mode). The rest of the connections are straight forward: 

  *      Connect the VCC pin to the Oak VCC
  *      Connect both GND pins to the Oak GND (via GND rail)
  *      Connect the Trig pin to Oak pin #2
  *      Connect the Echo pin to Oak pin #4

{{http://digistump.com/wiki/_media/oak/tutorials/us-100_ultrasonic_2.png?300|
{{http://digistump.com/wiki/_media/oak/tutorials/us-100_ultrasonic_2.png?500}}
     

Here's a picture of the actual setup. Note the differences from the sketch: The sensor is facing outward from the breadboard, and the Oak is 180. You can also see here that the jumper does __**NOT**__ connect the 2 rear pins, thereby enabling digital mode.

===== Code =====

The first part of our sketch is the variable declaration:

<code>
/*
 US-100 Ultrasonic distance sensor:
 VCC to Oak vcc
 GND x2 to Ground Rail to Oak Ground
 Trig to Oak Pin 2
 Echo to Oak Pin 4
 */


int trigPin = 2; // Trigger Pin
int echoPin = 4; // Echo Pin
int LEDPin = 1; // Onboard LED

unsigned long Time_Echo_us = 0; // container for PulseIn data
unsigned long Len_mm  = 0; // variable for length conversion

char post_Distance[16]; //particle post variable

</code>

Next we tell the Oak what the pins will be doing in the setup section:

<code>

void setup() {
 
 pinMode(trigPin, OUTPUT);
 pinMode(echoPin, INPUT);
 pinMode(LEDPin, OUTPUT); // Use onboard LED for visual feedback
 
}

</code>

{{http://digistump.com/wiki/_media/oak/tutorials/ultrasonic.gif?200|
{{http://digistump.com/wiki/_media/oak/tutorials/ultrasonic.gif?400}}

===== Conclusion =====
Digistump Wiki

User Tools

Site Tools

Page Tools
