oak:tutorials:serialupdate
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision Last revision Both sides next revision | ||
|
oak:tutorials:serialupdate [2016/03/24 07:37] fab add sample wget command |
oak:tutorials:serialupdate [2017/08/01 15:38] digistump [Downloading the Programmer Script and Lastest Update] |
||
|---|---|---|---|
| Line 30: | Line 30: | ||
| ====== Connecting Your Oak ====== | ====== Connecting Your Oak ====== | ||
| - | To program your Oak over serial, you will want to connect the GND of your USB-Serial Adapter to the Oak's GND, RX to TX, TX to RX, and P2 (on the Oak) to GND (on the Oak). You can then power the Oak via the on-board MicroUSB slot, or by providing appropriate power to the VIN or VCC pins. | + | To program your Oak over serial, you will want to connect the GND of your USB-Serial Adapter to the Oak's GND, RX to TX, TX to RX, and P2 (on the Oak) to GND (on the Oak). You can then power the Oak via the on-board Micro USB slot, or by providing appropriate power to the VIN or VCC pins. |
| + | |||
| + | <code> | ||
| + | Adapter Oak | ||
| + | --------------- | ||
| + | GND -> GND | ||
| + | RX -> TX | ||
| + | TX -> RX | ||
| + | VCC -> VIN/VCC (only if not powered over USB) | ||
| + | P2 -> GND | ||
| + | </code> | ||
| //Needs pic of an adapter here, and some more detailed explanation of pin connections// | //Needs pic of an adapter here, and some more detailed explanation of pin connections// | ||
| Line 36: | Line 46: | ||
| ====== Downloading the Programmer Script and Lastest Update ====== | ====== Downloading the Programmer Script and Lastest Update ====== | ||
| - | Download the latest firmware image here: https://oakota.digistump.com/firmware/firmware_v1.bin (ignore the SSL error to download, you'll see the certificate is registered to us at digistump.com). Eg. | + | Download the latest firmware image here: https://digistump.com/firmware_v1.bin |
| <code> | <code> | ||
| - | wget --no-check-certificate https://oakota.digistump.com/firmware/firmware_v1.bin | + | wget https://digistump.com/firmware_v1.bin |
| </code> | </code> | ||
oak/tutorials/serialupdate.txt · Last modified: 2018/01/23 02:02 by szalap
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 3.0 Unported
