User Tools

Site Tools


oak:tutorials:serial

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
oak:tutorials:serial [2016/02/26 03:18]
spiderbike [Connecting to the Serial output of the Oak]
oak:tutorials:serial [2016/03/02 03:02]
spiderbike [Connecting]
Line 37: Line 37:
   * enter **1** for Receive polarity (Idle 1 *default)   * enter **1** for Receive polarity (Idle 1 *default)
   * enter **2** for select output type (Normal (H=3.3V, L=GND))   * enter **2** for select output type (Normal (H=3.3V, L=GND))
-  * Now you need to change the baud rate of the Bus pirate to match, as you are just going to pass thru data as it wont keep otherwise+  * Now you need to change the baud rate of the Bus pirate to match, as you are just going to pass thru data as it wont keep up otherwise
   * enter **b** to set baud rate   * enter **b** to set baud rate
   * enter **10** for BRG Raw value we want one not specified in the list (74880) which equates to **52**   * enter **10** for BRG Raw value we want one not specified in the list (74880) which equates to **52**
oak/tutorials/serial.txt · Last modified: 2016/03/02 03:02 by spiderbike