User Tools

Site Tools


oak:tutorials:relay

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
oak:tutorials:relay [2016/02/22 09:04]
wminarik [Parts:]
oak:tutorials:relay [2016/03/10 22:47]
digistump
Line 1: Line 1:
- 
-=====THIS TUTORIAL HAS NOT YET BEEN REVIEWED, PLEASE DO NOT USE UNTIL IT HAS====== 
- 
 ====== 3.3V Relay Shield Tutorial ====== ====== 3.3V Relay Shield Tutorial ======
  
Line 44: Line 41:
 [[https://​s3.amazonaws.com/​digispark/​images/​m/​3v3-relay-shield-1.jpg|{{https://​s3.amazonaws.com/​digispark/​images/​t/​3v3-relay-shield-1.jpg}}]] [[https://​s3.amazonaws.com/​digispark/​images/​m/​3v3-relay-shield-1.jpg|{{https://​s3.amazonaws.com/​digispark/​images/​t/​3v3-relay-shield-1.jpg}}]]
  
-Solder ​the leads of the resistor. Place the diode in the orientation indicated (silver band over band silkscreen) and solder. Clip off the excess as pictured (also shown are solder pads on the reverse for changing the controlling digital pin).+Place and solder ​the leads of the resistor. Place the diode in the orientation indicated (silver band over band silkscreen) and solder. Clip off the excess as pictured (also shown are solder pads on the reverse for changing the controlling digital pin).
  
 [[https://​s3.amazonaws.com/​digispark/​images/​m/​3v3-relay-shield-2.jpg|{{https://​s3.amazonaws.com/​digispark/​images/​t/​3v3-relay-shield-2.jpg}}]] [[https://​s3.amazonaws.com/​digispark/​images/​m/​3v3-relay-shield-2.jpg|{{https://​s3.amazonaws.com/​digispark/​images/​t/​3v3-relay-shield-2.jpg}}]]
 [[https://​s3.amazonaws.com/​digispark/​images/​m/​3v3-relay-shield-3.jpg|{{https://​s3.amazonaws.com/​digispark/​images/​t/​3v3-relay-shield-3.jpg}}]] [[https://​s3.amazonaws.com/​digispark/​images/​m/​3v3-relay-shield-3.jpg|{{https://​s3.amazonaws.com/​digispark/​images/​t/​3v3-relay-shield-3.jpg}}]]
  
-Then solder and clip the leads of the NPN transistor. Make sure that it doesn'​t overhang the spot reserved for the relay.+Insert the NPN transistor, matching the shape with the printing on the board and solder and clip the leads. Make sure that it doesn'​t overhang the spot reserved for the relay.
  
 [[https://​s3.amazonaws.com/​digispark/​images/​m/​3v3-relay-shield-4.jpg|{{https://​s3.amazonaws.com/​digispark/​images/​t/​3v3-relay-shield-4.jpg}}]] [[https://​s3.amazonaws.com/​digispark/​images/​m/​3v3-relay-shield-4.jpg|{{https://​s3.amazonaws.com/​digispark/​images/​t/​3v3-relay-shield-4.jpg}}]]
oak/tutorials/relay.txt · Last modified: 2016/03/10 22:47 by digistump