Differences

This shows you the differences between two versions of the page.

--- oak:tutorials:manual_claim [2016/04/01 15:55]
digistump created
+++ oak:tutorials:manual_claim [2016/05/25 22:56] (current)
pfeerick added link to instructions about safe mode
@@ Line 1: / Line 1: @@
+====== Manually Claiming an Oak on Particle ======
-  - Connect to your Oak's wifi network with a computer/smartphone/tablet/etc (which is available only when the Oak is in config mode/new) - with the SSID ACORN-XXXXX
+There were some early issues (now fixed) with Oaks not properly claiming themselves on the Particle Cloud - if you are experience this issue - where the first update worked but the config wizard said "Your Oak did not connect to the cloud, please retry or change your WiFi settings." or the Oak tool says "No devices on this account" - please try this tutorial.
+  - Connect to your Oak's wifi network with a computer/smartphone/tablet/etc (which is available only when the Oak is in config mode/new) - with the SSID ACORN-XXXXX. If you can't see your Oak due to it now being connected to your wireless network, follow the instructions on the [[oak:tutorials:troubleshooting|troubleshooting page]] to put it into safe mode.
   - Once connected in a web browser go to http://192.168.0.1/particle
   - If the page that comes up says "connected" then proceed with this tutorial, if not please see the other troubleshooting guides or use the config wizard to make sure you have the right WiFi settings entered.

Digistump Wiki