Digistump Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.


  - Connect to your Oak's wifi network with a computer/smartphone/tablet/etc (which is available only when the Oak is in config mode/new) - with the SSID ACORN-XXXXX
  - Once connected in a web browser go to http://192.168.0.1/particle
  - If the page that comes up says "connected" then proceed with this tutorial, if not please see the other troubleshooting guides or use the config wizard to make sure you have the right WiFi settings entered. 
  - Go to: http://192.168.0.1/device-id and copy the id (the id is the part after "id":" - ie. {"id":"THIS_IS_THE_ID"}
  - Connect back to your internet wifi network (but leave the Oak on!) - Go to: https://build.particle.io/login
  - Login using the Particle account you created or used during the device/config/first update wizard tutorial.
  - Once logged in click the "devices" button:
  - {{ :oak:tutorials:devices.jpg?direct&600 |}}
  - Then click "Add New Device":
  - {{ :oak:tutorials:adddevice.jpg?direct&600 |}}
  - Paste the ID you copied earlier into this box and click "Claim A Device" - the device should now be added to your account.

Digistump Wiki

User Tools

Site Tools

Page Tools