User Tools

Site Tools


oak:tutorials:manual_claim

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
oak:tutorials:manual_claim [2016/04/01 15:56]
digistump
oak:tutorials:manual_claim [2016/05/25 22:56]
pfeerick added link to instructions about safe mode
Line 4: Line 4:
 There were some early issues (now fixed) with Oaks not properly claiming themselves on the Particle Cloud - if you are experience this issue - where the first update worked but the config wizard said "Your Oak did not connect to the cloud, please retry or change your WiFi settings."​ or the Oak tool says "No devices on this account"​ - please try this tutorial. There were some early issues (now fixed) with Oaks not properly claiming themselves on the Particle Cloud - if you are experience this issue - where the first update worked but the config wizard said "Your Oak did not connect to the cloud, please retry or change your WiFi settings."​ or the Oak tool says "No devices on this account"​ - please try this tutorial.
  
-  - Connect to your Oak's wifi network with a computer/​smartphone/​tablet/​etc (which is available only when the Oak is in config mode/new) - with the SSID ACORN-XXXXX+  - Connect to your Oak's wifi network with a computer/​smartphone/​tablet/​etc (which is available only when the Oak is in config mode/new) - with the SSID ACORN-XXXXX. If you can't see your Oak due to it now being connected to your wireless network, follow the instructions on the [[oak:​tutorials:​troubleshooting|troubleshooting page]] to put it into safe mode.
   - Once connected in a web browser go to http://​192.168.0.1/​particle   - Once connected in a web browser go to http://​192.168.0.1/​particle
   - If the page that comes up says "​connected"​ then proceed with this tutorial, if not please see the other troubleshooting guides or use the config wizard to make sure you have the right WiFi settings entered. ​   - If the page that comes up says "​connected"​ then proceed with this tutorial, if not please see the other troubleshooting guides or use the config wizard to make sure you have the right WiFi settings entered. ​
oak/tutorials/manual_claim.txt · Last modified: 2016/05/25 22:56 by pfeerick