User Tools

Site Tools


oak:tutorials:kit_parts

This is an old revision of the document!


Oak Starter and Ultimate Parts List

Starter Kit Parts List:

  • 3x Oaks
  • 1x Clear Plastic Part Box
  • 1x 400 hole 85x55mm Breadboard
  • 1x 3ft Micro USB Cable
  • 1x Set of 40 M to M 30cm Jumper Wires
  • 1x Set of 40 M to F 30cm Jumper Wires
  • 1x 9g Micro Servo
  • 1x GL5528 Photocell
  • 1x HC-SR04 Ultrasonic Range Module
  • 3x 2N2222 Transistors TO-92
  • 2x 1N4148 Diodes
  • 1x TTP223B Touch Module
  • 1x DS18B20 One Wire Temperature Sensor TO-92
  • 1x 5mm RGB LED Common Cathode
  • 3x 3mm Red LED
  • 3x 3mm Green LED
  • 3x 3mm Yellow LED
  • 3x 12mm Tactile Button (see image)
  • 1x 3.3v Active Buzzer
  • 10x 150 Ohm ¼W Resistors
  • 10x 10K Ohm ¼W Resistors
  • 10x 4.7K Ohm ¼W Resistors
  • 1x HS0038 IR Receiver
  • 1x QRD1114 IR Interrupter
  • 1x SW-520D Rolling Ball Switch

The Ultimate Kit includes all of the above, plus:

  • 2x Additional Oaks
  • 1x Digispark/Oak Button Shield
  • 1x Oak TFT LCD Shield
  • 1x DigiLED Shield
  • 1x HC-SR501 PIR Module
  • 1x Breadboard Power Supply Module
  • 1x MC-38 Magnetic Door Switch
  • 1x Soil Moisture Sensor Module Set
  • 1x 9V Battery
  • 1x 9V to Barrel Jack Cable
oak/tutorials/kit_parts.1458381696.txt.gz · Last modified: 2016/03/19 03:01 by digistump