Starter Kit Parts List:

3x Oaks 1x Clear Plastic Part Box 1x 400 hole 85x55mm Breadboard 1x 3ft Micro USB Cable 1x Set of 40 M to M 30cm Jumper Wires 1x Set of 40 M to F 30cm Jumper Wires 1x 9g Micro Servo 1x GL5528 Photocell 1x HC-SR04 Ultrasonic Range Module 3x 2N2222 Transistors TO-92 2x 1N4148 Diodes 1x TTP223B Touch Module 1x DS18B20 One Wire Temperature Sensor TO-92 1x 5mm RGB LED Common Cathode 3x 3mm Red LED 3x 3mm Green LED 3x 3mm Yellow LED 3x 12mm Tactile Button (see image) 1x 3.3v Active Buzzer 10x 150 Ohm ¼W Resistors 10x 10K Ohm ¼W Resistors 10x 4.7K Ohm ¼W Resistors 1x HS0038 IR Receiver 1x QRD1114 IR Interrupter 1x SW-520D Rolling Ball Switch

The Ultimate Kit includes all of the above, plus:

2x Additional Oaks 1x Digispark/Oak Button Shield 1x Oak TFT LCD Shield 1x DigiLED Shield 1x HC-SR501 PIR Module 1x Breadboard Power Supply Module 1x MC-38 Magnetic Door Switch 1x Soil Moisture Sensor Module Set 1x 9V Battery 1x 9V to Barrel Jack Cable