Digistump Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Oak Starter and Ultimate Parts List ======

Starter Kit Parts List:

3x Oaks
1x Clear Plastic Part Box
1x 400 hole 85x55mm Breadboard
1x 3ft Micro USB Cable
1x Set of 40 M to M 30cm Jumper Wires
1x Set of 40 M to F 30cm Jumper Wires
1x 9g Micro Servo
1x GL5528 Photocell
1x HC-SR04 Ultrasonic Range Module
3x 2N2222 Transistors TO-92
2x 1N4148 Diodes
1x TTP223B Touch Module
1x DS18B20 One Wire Temperature Sensor TO-92
1x 5mm RGB LED Common Cathode
3x 3mm Red LED 
3x 3mm Green LED
3x 3mm Yellow LED
3x 12mm Tactile Button (see image)
1x 3.3v Active Buzzer
10x 150 Ohm ¼W Resistors
10x 10K Ohm ¼W Resistors
10x 4.7K Ohm ¼W Resistors
1x HS0038 IR Receiver
1x QRD1114 IR Interrupter
1x SW-520D Rolling Ball Switch 



The Ultimate Kit includes all of the above, plus:

2x Additional Oaks
1x Digispark/Oak Button Shield
1x Oak TFT LCD Shield
1x DigiLED Shield
1x HC-SR501 PIR Module
1x Breadboard Power Supply Module
1x MC-38 Magnetic Door Switch
1x Soil Moisture Sensor Module Set
1x 9V Battery
1x 9V to Barrel Jack Cable

Digistump Wiki

User Tools

Site Tools

Page Tools