Starter Kit Parts List:

• 3x Oaks
• 1x Clear Plastic Part Box
• 1x 400 hole 85x55mm Breadboard
• 1x 3ft Micro USB Cable
• 1x Set of 40 M to M 30cm Jumper Wires
• 1x Set of 40 M to F 30cm Jumper Wires
• 1x 9g Micro Servo
• 1x GL5528 Photocell
• 1x HC-SR04 Ultrasonic Range Module
• 3x 2N2222 Transistors TO-92
• 2x 1N4148 Diodes
• 1x TTP223B Touch Module
• 1x DS18B20 One Wire Temperature Sensor TO-92
• 1x 5mm RGB LED Common Cathode
• 3x 3mm Red LED
• 3x 3mm Green LED
• 3x 3mm Yellow LED
• 3x 12mm Tactile Button (see image)
• 1x 3.3v Active Buzzer
• 10x 150 Ohm ¼W Resistors
• 10x 10K Ohm ¼W Resistors
• 10x 4.7K Ohm ¼W Resistors
• 1x HS0038 IR Receiver
• 1x QRD1114 IR Interrupter
• 1x SW-520D Rolling Ball Switch

The Ultimate Kit includes all of the above, plus:

• 2x Additional Oaks
• 1x Digispark/Oak Button Shield
• 1x Oak TFT LCD Shield
• 1x DigiLED Shield
• 1x HC-SR501 PIR Module
• 1x Breadboard Power Supply Module
• 1x MC-38 Magnetic Door Switch
• 1x Soil Moisture Sensor Module Set
• 1x 9V Battery
• 1x 9V to Barrel Jack Cable