User Tools

Site Tools


oak:tutorials:headers

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

oak:tutorials:headers [2016/01/07 15:25] (current)
digistump created
Line 1: Line 1:
 +======Soldering Headers to the Oak======
 +
 +=====Parts:​=====
 +
 +^ Part       ^ Quantity ​         ^Identification^
 +| Oak|1| |
 +| 2x9pin female 0.1" pitch header| 1| |
 +| 1x3pin female 0.1" pitch header| 1| |
 +
 +**Soldering:​** If you are new to soldering we recommend the following tutorials:
 +Soldering Basics (http://​www.sparkfun.com/​tutorials/​106) and Soldering Crash Course from the folks at Sparkfun (http://​www.sparkfun.com/​tutorials/​354).
 +How to solder from the Curious Inventor: http://​store.curiousinventor.com/​guides/​How_to_Solder
 +
 +Adafruit has this excellent guide that starts with the tools needed and then shows detailed pictures, including some of the common problems that beginners experience (http://​learn.adafruit.com/​adafruit-guide-excellent-soldering)
 +
 +**We assume for these assembly instructions that you know the basics of thru-hole soldering. If you don't check out the links above, these boards are very easy to solder - we promise!**
 +
 +
 +=====Assembly:​=====
 +
 +
 +[[https://​s3.amazonaws.com/​digispark/​images/​m/​oak1.jpg|{{https://​s3.amazonaws.com/​digispark/​images/​t/​oak1.jpg}}]]
 +
 +Solder each header into the Oak, black plastic on top, solder from the bottom.
 +
 +[[https://​s3.amazonaws.com/​digispark/​images/​m/​oak2.jpg|{{https://​s3.amazonaws.com/​digispark/​images/​t/​oak2.jpg}}]]
 +
 +The 3 pin header is optional, those same connections can be found on the 9 pin headers, but it is required if you plan to plug a Digispark style shield into the Oak.
 +
 +[[https://​s3.amazonaws.com/​digispark/​images/​m/​oak3.jpg|{{https://​s3.amazonaws.com/​digispark/​images/​t/​oak3.jpg}}]]
 +
 +If you plan to use the Oak exclusively with a breadboard, we recommend using male headers instead - you can find spare male headers in most shield kits. You can also use the female headers with male headers inserted and flip the Oak over, or use jumper wires from the Oak to the breadboard.
 +
 +
  
oak/tutorials/headers.txt · Last modified: 2016/01/07 15:25 by digistump