Digistump Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Oak Firmware Revision History ======

===== Overview =====

^  Firmware Version  ^  Status   ^  Release Date   ^  New Features          ^  Bugs Fixed  ^  Known Bugs  ^  System Version Integar (Major - Minor)  ^
|  1.0.5  |  Stable    |  6 July 2016  |	            | Particle Offline/Online crashes fixed| |  10 - 5  |
|  1.0.4  |  Beta      |  June 2016    |	            |	        | Particle crashes | |
|  1.0.3  |  Unstable  |	       |	            |	        | Particle crashes | |
|  1.0.2  |  Unstable  |	       | OakTerm	    |	        | Particle crashes |  7 - 0  |
|  1.0.1  |  Stable    |  24 Mar 2016  | Manual Config Mode |	        |		|  6 - 0  |
|  1.0.0  |  Stable    |  14 Mar 2016  | First Stable Release|	        |	 	|  6 - 0  |
|  0.9.5  |  Beta      |	       | FastOTA Programming| Wifi Bug  |		|  5 - 0  |
|  0.9.4  |  Unstable  |	       |	            |	        | Wifi Bug 	|  ( 5 - 0 )  | 
|  0.9.3  |  Beta      |	       |	            |	        |		|  2 - 0  |
|  0.9.2  |  Beta      |	       |	            |	        |		|  2 - 0  |
|  0.9.1  |  Beta      |	       |	            |	        |		|  1 - 0  |

===== Detailed History =====

==== 1.0.5 ====
  * Fixes issue with Particle cloud that resulted in Oak constantly reporting itself to be online and offline, and refusing to accept new code. Issue related to unused system OTA code, which has been disabled for now.
  * System Version 5 (although may be displayed as 10 in some places)

==== 1.0.4 ====
  * Unstable release

==== 1.0.3 ====
  * Unstable release

==== 1.0.2 ====
  * Introduction of OakTerm - the internet connected version of the Arduino Serial Monitor. [[https://digistump.com/board/index.php/topic,2310.0.html|This release was unstable for some people so was pulled offline]] to be replaced by 1.0.5 which was first stable release to support OakTerm.

==== 1.0.1 ====
  * Introduced Manual Config mode, meaning the Oak would only reboot into safe mode when a jumper was connected between P1 and GND, or when there was unstable code. It will no longer automatically go into safe mode if the connection the Particle cloud is lost. 

==== 1.0.0 ====
  * First official release version

==== 0.9.5 ====
  * Beta
  * System Version: 5

==== 0.9.4 ====
  * Beta
  * System Version: 4

==== 0.9.3 ====
  * Beta
  * System Version: 2 (was mistakenly not incremented)

==== 0.9.2 ====
  * Beta
  * System Version: 2

==== 0.9.1 ====
  * Beta
  * System Version: 1
Digistump Wiki

User Tools

Site Tools

Page Tools
