User Tools

Site Tools


digix:tutorials:software

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
digix:tutorials:software [2014/12/21 14:05]
digistump [Software:]
digix:tutorials:software [2017/04/04 14:52] (current)
digistump
Line 1: Line 1:
 ====== Installing the DigiX Software ====== ====== Installing the DigiX Software ======
- 
  
 =====Software:​===== =====Software:​=====
  
-The Digispark Pro uses the Arduino IDE - Digistump Release ​1.5.x which is the Arduino ​IDE with some custom additions and supports Digispark, Digispark Pro, and DigiXThese are presented as a fully integrated package with 1.5.x that can be downloaded as an installed ​or zip file.+The DigiX uses the Arduino IDE 1.6.5+  (Arduino ​1.6.5r2 - NOT 1.6.or 1.6.7 strongly recommended)
  
-First download the appropriate package: 
  
-      * Windows (now with fully signed drivers!) +====== Installation Instructions======
-          * Installer (recommended)https://​github.com/​digistump/​DigistumpArduino/​releases/​download/​v1.5.8B/​DigistumpArduinoInstall1.5.8B.exe +
-          * Zip: https://​github.com/​digistump/​DigistumpArduino/​releases/​download/​v1.5.8B/​DigistumpIDE1.5.8B.zip +
-      * Mac: https://​github.com/​digistump/​DigistumpArduino/​releases/​download/​v1.5.8B/​DigistumpIDE1.5.8BOSX.zip +
-      * Linux:  +
-          * 32-bit: https://​github.com/​digistump/​DigistumpArduino/​releases/​download/​v1.5.8B/​DigistumpIDE1.5.8B-linux32.zip +
-          * 64-bit: https://​github.com/​digistump/​DigistumpArduino/​releases/​download/​v1.5.8B/​DigistumpIDE1.5.8B-linux64.zip +
-      * Note: report any issues with the builds to the forum: http://​digistump.com/​board+
  
 +  *  **First download the appropriate Arduino package at the Arduino.cc website: https://​www.arduino.cc/​en/​Main/​Software**
 +  *  If using Arduino 1.6.6 or higher and windows - download, unzip, and run "​Install Drivers"​ from here: https://​github.com/​digistump/​DigistumpArduino/​releases/​download/​1.6.7/​Digistump.Drivers.zip
 +  *  **Install or Unzip the Arduino application.**
 +  *  **Run the Arduino application.**
 +  *  **In the Arduino application go to the "​File"​ menu and select "​Preferences"​**
 +{{ :​digispark:​tutorials:​preferences.gif?​nolink |}}
 +  *  **In the box labeled "​Additional Boards Manager URLs" enter:** <​code>​http://​digistump.com/​package_digistump_index.json</​code>​
 +**and click OK**
  
-**Compiling from source** https://​github.com/​digistump/​DigistumpArduino +NoteIf you already have additional URLs entered in that box, then click the button on the right of the box and enter this URL on a new line
-==== Windows Install ====+{{ :​digispark:​tutorials:​entry.jpg?​nolink |}}
  
-  * Complete these steps before plugging in the Digispark (Pro) +  *  **Go to the "​Tools"​ menu and then the "Board" submenu ​select ​"Boards Manager"​ and then from the type drop down select "​Contributed":​** ​ 
-  ​* ​Installer: Run the installer, when it pops up the driver install, install the drivers as well. When complete run the "Arduino IDE Digistump Release" from your start menu. +  * **Select the "​Digistump SAM Boards"​ package ​and click the "​Install" ​button.** 
-  * Zip: Unzip and run the driver install - which is the "​Install ​Drivers.bat" ​file inside the drivers folderThen run Arduino.exe to run the IDE.+{{ :​digix:​tutorials:​digix_install.gif?nolink |}}
  
-==== Mac OS X Install====+    *  **You'​ll see the download progress on the bottom bar of the "​Boards Manager"​ window, when complete it will show "​Installed"​ next to that item on the list.**  
 +    *  **WINDOWS USERS: When complete the install with pop up a Driver ​Install ​Wizard window, please click "​Next"​ on this Window to install the drivers for Digistump Boards** (If you already have them installed, this installer will update them and install any that are missing) 
 +    * **With the install complete, close the "​Boards Manager"​ window and select the "​Digistump DigiX" from the Tools->​Boards menu.**  
 +{{ :​digix:​tutorials:​pickdigix.gif?​nolink |}}
  
 +  *  **The install is now complete!** (Linux users see note below)
  
-  * Disable Gatekeeper by following this tutorial: [[digispark:​tutorials:​gatekeeper|Disabling Gatekeeper on OSX]] 
-  * Unzip the App and drag it to your Programs folder - or whereever you would like to store it. 
-  * Run the "​Arduino - Digistump Release"​ App that you just unzipped. ​ 
-  * See the troubleshooting section below for any other issues. 
  
-=== Linux Install ​===+==== Sources ====
  
-  ​Untar and run the Arduino executable.+**Digistump Package Sources: ** https://​github.com/​digistump/​DigistumpArduino
  
  
 Plug it in and away you go! It works like other Arduino boards, serial monitor works as well. Check out the examples as well as the other tutorials here and the "Due Only Libraries"​ here: http://​arduino.cc/​en/​Reference/​Libraries for some of the cool features. Plug it in and away you go! It works like other Arduino boards, serial monitor works as well. Check out the examples as well as the other tutorials here and the "Due Only Libraries"​ here: http://​arduino.cc/​en/​Reference/​Libraries for some of the cool features.
digix/tutorials/software.1419199525.txt.gz · Last modified: 2014/12/21 14:05 by digistump