User Tools

Site Tools


digix:digix

This is an old revision of the document!


DigiX Product Description

The ultimate 100% Arduino Due compatible dev board with Wifi and Mesh networking, Audio, USB OTG, microSD, and 99 i/o pins!

The DigiX has a 32-bit 84 MHz MCU, embedded low power Wi-Fi (b/g/n), optional mesh networking, 99 usable i/o pins, audio output, USB on the go support, onboard EEPROM, onboard microSD slot, built in real time clock, and is 100% compatible with anything that works with the Arduino Due - no adapters, code changes, or special software needed! This is the ultimate Arduino compatible development board, ready for any project!

Here are the specifications:

  • 84 MHz Clock Speed
  • 32-bit ARM Processor (AT91SAM3X8E)
  • On board 802.11b/g/n WiFi Module (FCC/CE Approved)
  • nRF24L01+ socket(not included)
  • On Board MicroSD slot
  • On Board 4KB (32kbit) EEPROM
  • 3.3V, 3.4-5.5V (LiPo Ready), 5V, or 6-16V input (onboard buck regulator)
  • 96KB SRAM
  • 512KB Flash
  • 1A @ 3.3V and 1A @ 5V Available (when powered at 5V+)
  • 99 I/O Pins
  • 12 PWM
  • 12 Analog Input
  • 2 Analog Output (DAC)
  • Onboard LED (connected to Pin 13)
  • 130ma Total Current Output from Processor

The DigiX - like the Arduino Due, UDOO, and Spark Core runs at 3.3V. The maximum voltage that the I/O pins can tolerate is 3.3V. Connecting the I/O pins to higher voltages, including 5V, could damage the DigiX.

Source files can be found on the resources tab of the product page: http://digistump.com/products/50

digix/digix.1391339043.txt.gz · Last modified: 2014/02/02 03:04 by digistump