Digistump Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== WiFi Module Client Setup ======

  * Follow the first time setup guide if you haven't already.
 
  * On a computer, tablet, or smartphone connect to the USR-WIFI232-T wireless network.
 
  * Open a web browser (tested with Chrome) and go to http://10.10.100.254

  * On the left hand side navigation click on Other Settings and set the settings as follows:
Baud Rate: As specified in the sketch/example you are using.

Then click the Save halfway down the page -- **NOT** the one at the bottom -- and when it asks if you'd like to restart click the back button.

Then set the following settings: 
  * Protocol: TCP Client
  * TCP Time Out Setting: 300

And click the Save at the bottom of the page.
{{https://s3.amazonaws.com/digispark/images/client.PNG}}

  *This time you can hit restart and let the module restart so the settings take effect.
{{https://s3.amazonaws.com/digispark/images/tinywifi_restart.PNG}}

**Your Wifi module is now set up and ready for client sketches at the baud rate you selected.**

Digistump Wiki

User Tools

Site Tools

Page Tools