Differences

This shows you the differences between two versions of the page.

--- digispark:tutorials:probetashield [2014/06/27 19:12]
netguy204
+++ digispark:tutorials:probetashield [2016/06/09 12:03] (current)
@@ Line 34: / Line 34: @@
 Insert two 9 pin male headers from the bottom of the PCB and solder on the top - plug Digispark Pro with female headers into the bottom.
-Insert capacitors as labeled - solder connection on the bottom. Trim excess leads.
+Insert capacitors as labeled (large cap is polarized '-' leg to '-' on board) - solder connection on the bottom. Trim excess leads.
 Insert 8x8 LED Matrix with the black writing on the edge of the Matrix facing downward to the bottom edge of the board - NOT facing the capacitors. Solder connections.
@@ Line 124: / Line 124: @@
 </code>
-Or, [[https://github.com/netguy204/BetaInvaders/archive/master.zip|try out this simple version of Space Invaders]]
+Or, [[https://github.com/netguy204/BetaInvaders/archive/master.zip|try out this simple version of Space Invaders]].
+Or, [[https://github.com/netguy204/BetaSketcher/archive/master.zip|play with an etch-a-sketch simulator]].
+Or, [[http://playground.arduino.cc/Main/LedControl|LedControl::Arduino library for the MAX7221 and MAX7219 ]].

Digistump Wiki