Digistump Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Digispark Pro Pin Usage Guide ======

This table details the function of each pin on the Digispark Pro and any notes the are relevant.

| ^Pin Number ^Output Voltage ^ADC        ^PWM[[digispark:tutorials:propwm|PWM]]  ^                   ^    ^     ^
^ VCC    |VCC        |5v             |           |     |                   |    |     |
^ SDA    |0   SDA    |5v             |           |Y    |                   |    |     |
^ LED    |1   LED    |5v             |           |Y    |                   |    |     |
^ SCL    |2   SCL    |5v             |           |Y    |                   |    |     |
^ USB+   |3   USB+   |5v             | A3        |Y    |                   |    |     |
^ USB-   |4   USB-   |5v             |           |Y    |                   |    |     |
^ Pin 5  |5          |5v             | A5        |Y    |                   |    |     |
^ GND    |GND        |0v             |           |     |                   |    |     |
^ VIN    |VIN(6-16v) |               |           |     |                   |    |     |
| ^Pin Number ^Output Voltage ^ADC        ^PWM  ^                   ^    ^     ^
^ RX     |6   RX     |5v             | A6        |     |                   |    |     |
^ TX     |7   TX     |5v             | A7        |     |                   |    |     |
^ MISO   |8   MISO   |5v             | A8        |Y    |                   |    |     |
^ INT1   |9   INT1   |5v             | A9        |     |                   |    |     |
^ MOSI   |10  MOSI   |5v             | A10        |     |                   |    |     |
^ SCK    |11  SCK    |5v             | A11        |     |                   |    |     |
^ SS     |12  SS     |5v             | A12        |     |                   |    |     |
^ RST    |RST        |               |           |     |                   |    |     |
| ^Pin Number ^Output Voltage ^ADC        ^PWM  ^                   ^    ^     ^
^ VIN    |VIN(6-16v) |               |           |     |                   |    |     |
^ GND    |GND        |0v             |           |     |                   |    |     |
^ VCC    |VCC        |5v             |           |     |                   |    |     |

  * Digispark Pro Pin Out Diagram: [[http://digispark.s3.amazonaws.com/DigisparkProDiagram2.png]]
  * PWM is allowed on 0-5 and 8 but only 3 channels of it are allowed at one time
Digistump Wiki

User Tools

Site Tools

Page Tools
