digispark:tutorials:pinguidepro
Differences
This shows you the differences between two versions of the page.
|
digispark:tutorials:pinguidepro [2015/01/09 11:33] digistump |
digispark:tutorials:pinguidepro [2016/06/09 12:03] |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| - | ====== Digispark Pro Pin Usage Guide ====== | ||
| - | |||
| - | This table details the function of each pin on the Digispark Pro and any notes the are relevant. | ||
| - | |||
| - | | ^Pin Number ^Output Voltage ^ADC ^PWM ^ ^ ^ ^ | ||
| - | ^ VCC |VCC |5v | | | | | | | ||
| - | ^ SDA |0 SDA |5v | |Y | | | | | ||
| - | ^ LED |1 LED |5v | |Y | | | | | ||
| - | ^ SCL |2 SCL |5v | |Y | | | | | ||
| - | ^ USB+ |3 USB+ |5v | A3 |Y | | | | | ||
| - | ^ USB- |4 USB- |5v | |Y | | | | | ||
| - | ^ Pin 5 |5 |5v | A5 |Y | | | | | ||
| - | ^ GND |GND |0v | | | | | | | ||
| - | ^ VIN |VIN(6-16v) | | | | | | | | ||
| - | | ^Pin Number ^Output Voltage ^ADC ^PWM ^ ^ ^ ^ | ||
| - | ^ RX |6 RX |5v | A6 | | | | | | ||
| - | ^ TX |7 TX |5v | A7 | | | | | | ||
| - | ^ MISO |8 MISO |5v | A8 |Y | | | | | ||
| - | ^ INT1 |9 INT1 |5v | A9 | | | | | | ||
| - | ^ MOSI |10 MOSI |5v | A10 | | | | | | ||
| - | ^ SCK |11 SCK |5v | A11 | | | | | | ||
| - | ^ SS |12 SS |5v | A12 | | | | | | ||
| - | ^ RST |RST | | | | | | | | ||
| - | | ^Pin Number ^Output Voltage ^ADC ^PWM ^ ^ ^ ^ | ||
| - | ^ VIN |VIN(6-16v) | | | | | | | | ||
| - | ^ GND |GND |0v | | | | | | | ||
| - | ^ VCC |VCC |5v | | | | | | | ||
| - | |||
| - | * Digispark Pro Pin Out Diagram: [[http://digispark.s3.amazonaws.com/DigisparkProDiagram2.png]] | ||
| - | * PWM is allowed on 0-5 and 8 but only 3 channels of it are allowed at one time | ||
digispark/tutorials/pinguidepro.txt · Last modified: 2016/06/09 12:03 (external edit)
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 3.0 Unported
