digispark:tutorials:pinguide
Differences
This shows you the differences between two versions of the page.
|
digispark:tutorials:pinguide [2015/08/29 03:19] SukkoPera Added pins for SPI |
digispark:tutorials:pinguide [2016/06/09 12:03] |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| - | ====== Digispark Pin Usage Guide ====== | ||
| - | This table details the function of each pin on the Digispark and any notes the are relevant. | ||
| - | |||
| - | ^ Pin \\ Number ^ Output \\ Voltage ^ Analogue Port Number \\ ''analogRead()'' ^ PWM ^ USB ^ Test \\ LED ^ I2C ^ SPI* ^ | ||
| - | |0 |5 V | |Y - 504 Hz | |Rev 1 |SDA | MISO | | ||
| - | |1 |5 V | |Y - 504 Hz | |Rev 2 / 4| | MOSI | | ||
| - | |2 |5 V |1 | | | |SCL | SCK | | ||
| - | |3 |3.6 V |3 | |Y - 1.5k Ohm to 5 V \\ Zener diode (3.6 V maximum in- & output) | | | ||
| - | |4 |3.6 V |2 |Y - 1007 Hz|Y \\ Zener diode (3.6 V maximum in- & output) | | | | ||
| - | |5 |3 V |0 | | | | | | ||
| - | |||
| - | * Note that the labeling of the pins for SPI is somewhat misleading. The table above is correct, but for use with ISP MISO and MOSI are swapped. | ||
digispark/tutorials/pinguide.txt · Last modified: 2016/06/09 12:03 (external edit)
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 3.0 Unported
