User Tools

Site Tools


digispark:tutorials:littlewire

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
digispark:tutorials:littlewire [2013/11/14 11:32]
digistump
digispark:tutorials:littlewire [2016/06/09 12:03] (current)
Line 5: Line 5:
 [[https://​s3.amazonaws.com/​digispark/​images/​m/​lw6.jpg|{{https://​s3.amazonaws.com/​digispark/​images/​t/​lw6.jpg}}]][[https://​s3.amazonaws.com/​digispark/​images/​m/​lw7.jpg|{{https://​s3.amazonaws.com/​digispark/​images/​t/​lw7.jpg}}]] [[https://​s3.amazonaws.com/​digispark/​images/​m/​lw6.jpg|{{https://​s3.amazonaws.com/​digispark/​images/​t/​lw6.jpg}}]][[https://​s3.amazonaws.com/​digispark/​images/​m/​lw7.jpg|{{https://​s3.amazonaws.com/​digispark/​images/​t/​lw7.jpg}}]]
  
-The Little Wire on Digispark Shield Kit connects ​provides a Little Wire compatible pinout on the Digispark. This allows the Digispark to be easily used as a Little Wire device, with the Little Wire firmware and libraries. The shield also provide pull-ups for the I2C lines, which can be enabled by an included jumper, and an external power jumper. The kit also includes a 6 pin IDC cable for connecting to other circuits or to standard 6-pin AVR ISP headers for programming AVR chips.+The Little Wire on Digispark Shield Kit provides a Little Wire compatible pinout on the Digispark. This allows the Digispark to be easily used as a Little Wire device, with the Little Wire firmware and libraries. The shield also provide pull-ups for the I2C lines, which can be enabled by an included jumper, and an external power jumper. The kit also includes a 6 pin IDC cable for connecting to other circuits or to standard 6-pin AVR ISP headers for programming AVR chips.
  
-Little Wire is multi-featured USB controlled Open Source Hardware tool packed in a minimal form factor designed by Ihsan Kehribar. The Little Wire for Digispark shield was designed by Ihsan in collaboration with Digistump. The Little Wire firmware can easily ​be loaded on to a Digispark for use with the Little Wire for Digispark shield.+Little Wire is multi-featured USB controlled Open Source Hardware tool packed in a minimal form factor designed by Ihsan Kehribar. The Little Wire for Digispark shield was designed by Ihsan in collaboration with Digistump. The Little Wire firmware can be easily ​loaded on to a Digispark for use with the Little Wire for Digispark shield.
  
 Little Wire has the following features: Little Wire has the following features:
Line 26: Line 26:
 | Little Wire Shield PCB|1| | | Little Wire Shield PCB|1| |
 | 6-pin IDC Cable|1| | | 6-pin IDC Cable|1| |
-| 4.7k ohm 1/4W 5% resistor|2| ​Brown Black Yellow|+| 4.7k ohm 1/4W 5% resistor|2| ​Yellow ​Violet ​Red|
 | 0.1" pitch Jumper/​Shunt |2| | | 0.1" pitch Jumper/​Shunt |2| |
 | 1x40pin male 0.1" pitch header| 22 pins worth| | | 1x40pin male 0.1" pitch header| 22 pins worth| |
Line 82: Line 82:
 =====Loading the firmware:​===== =====Loading the firmware:​=====
  
-Download the Little Wire firmware installer for your platform here:+Download the Little Wire firmware installer for your platform here - Under "​Single click installers for v1.3 firmware"​ - http://​littlewire.cc/​downloads.html
  
 Run the executable and when prompted plug in the Digispark that you will be using with the shield. When complete the Digispark will now appear as a Little Wire device 5 seconds after it is plugged into the computer. ​ Run the executable and when prompted plug in the Digispark that you will be using with the shield. When complete the Digispark will now appear as a Little Wire device 5 seconds after it is plugged into the computer. ​
digispark/tutorials/littlewire.1384457526.txt.gz · Last modified: 2013/11/14 11:32 by digistump