Digistump Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
======Digispark Product Description======

[[https://s3.amazonaws.com/digispark/images/m/digispark2.jpg|{{https://s3.amazonaws.com/digispark/images/t/digispark2.jpg}}]]
[[https://s3.amazonaws.com/digispark/images/m/digispark4.jpg|{{https://s3.amazonaws.com/digispark/images/t/digispark4.jpg}}]]
[[https://s3.amazonaws.com/digispark/images/m/digispark5.jpg|{{https://s3.amazonaws.com/digispark/images/t/digispark5.jpg}}]]
[[https://s3.amazonaws.com/digispark/images/m/digispark1.jpg|{{https://s3.amazonaws.com/digispark/images/t/digispark1.jpg}}]]
[[https://s3.amazonaws.com/digispark/images/m/digispark3.jpg|{{https://s3.amazonaws.com/digispark/images/t/digispark3.jpg}}]]

====Digispark: The micro-sized, affordable, Arduino enabled, usb development board!====

The Digispark is an Attiny85 based microcontroller development board similar to the Arduino line, only cheaper, smaller, and a bit less powerful. With a whole host of shields to extend its functionality and the ability to use the familiar Arduino IDE the Digispark is a great way to jump into electronics, or perfect for when an Arduino is too big or too much.

The Digispark is shipped fully assembled except for the two included and easy to solder headers.

Here are the specs:

  * Support for the Arduino IDE 1.0+ (OSX/Win/Linux)
  * Power via USB or External Source - 5v or 7-35v (automatic selection)
  * On-board 500ma 5V Regulator
  * Built-in USB
  * 6 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB)
  * 8k Flash Memory (about 6k after bootloader)
  * I2C and SPI (vis USI)
  * PWM on 3 pins (more possible with Software PWM)
  * ADC on 4 pins
  * Power LED and Test/Status LED
Digistump Wiki

User Tools

Site Tools

Page Tools
