Differences

This shows you the differences between two versions of the page.

--- digispark:tutorials:connectingpro [2014/12/21 14:01]
digistump [Software:]
+++ digispark:tutorials:connectingpro [2016/03/01 00:15]
digistump
@@ Line 11: / Line 11: @@
 =====Software:=====
-The Digispark Pro uses the Arduino IDE - Digistump Release 1.5.x which is the Arduino IDE with some custom additions and supports Digispark, Digispark Pro, and DigiX. These are presented as a fully integrated package with 1.5.x that can be downloaded as an installed or zip file.
+The Digispark Pro uses the Arduino IDE 1.6.5+  (Arduino 1.6.5r2 - NOT 1.6.6 or 1.6.7 strongly recommended)
-First download the appropriate package:
-      * Windows (now with fully signed drivers!)
+====== Installation Instructions: ======
-          * Installer (recommended): https://github.com/digistump/DigistumpArduino/releases/download/v1.5.8B/DigistumpArduinoInstall1.5.8B.exe
-          * Zip: https://github.com/digistump/DigistumpArduino/releases/download/v1.5.8B/DigistumpIDE1.5.8B.zip
-      * Mac: https://github.com/digistump/DigistumpArduino/releases/download/v1.5.8B/DigistumpIDE1.5.8BOSX.zip
-      * Linux:
-          * 32-bit: https://github.com/digistump/DigistumpArduino/releases/download/v1.5.8B/DigistumpIDE1.5.8B-linux32.zip
-          * 64-bit: https://github.com/digistump/DigistumpArduino/releases/download/v1.5.8B/DigistumpIDE1.5.8B-linux64.zip
-      * Note: report any issues with the builds to the forum: http://digistump.com/board
-==== Windows Install ====
-  * Complete these steps before plugging in the Digispark (Pro)
+  *  **First download the appropriate Arduino package at the Arduino.cc website: https://www.arduino.cc/en/Main/Software**
-  * Installer: Run the installer, when it pops up the driver install, install the drivers as well. When complete run the "Arduino IDE - Digistump Release" from your start menu.
+  *  If using Arduino 1.6.6 or higher and windows - download, unzip, and run "Install Drivers" from here: https://github.com/digistump/DigistumpArduino/releases/download/1.6.7/DigistumpDrivers.zip
-  * Zip: Unzip and run the driver install - which is the "Install Drivers.bat" file inside the drivers folder. Then run Arduino.exe to run the IDE.
+  *  **Install or Unzip the Arduino application.**
+  *  **Run the Arduino application.**
+  *  **In the Arduino application go to the "File" menu and select "Preferences"**
+{{ :digispark:tutorials:preferences.gif?nolink |}}
+  *  **In the box labeled "Additional Boards Manager URLs" enter:** <code>http://digistump.com/package_digistump_index.json</code>
+**and click OK**
-==== Mac OS X Install====
+Note: If you already have additional URLs entered in that box, then click the button on the right of the box and enter this URL on a new line.
+{{ :digispark:tutorials:entry.jpg?nolink |}}
+  *  **Go to the "Tools" menu and then the "Board" submenu - select "Boards Manager" and then from the type drop down select "Contributed":**
+  * **Select the "Digistump AVR Boards" package and click the "Install" button.**
+{{ :digispark:tutorials:digispark_install.gif?nolink |}}
-  * Disable Gatekeeper by following this tutorial: [[digispark:tutorials:gatekeeper|Disabling Gatekeeper on OSX]]
+    *  **You'll see the download progress on the bottom bar of the "Boards Manager" window, when complete it will show "Installed" next to that item on the list.**
-  * Unzip the App and drag it to your Programs folder - or whereever you would like to store it.
+    *  **WINDOWS USERS: When complete the install with pop up a Driver Install Wizard window, please click "Next" on this Window to install the drivers for Digistump Boards** (If you already have them installed, this installer will update them and install any that are missing)
-  * Run the "Arduino - Digistump Release" App that you just unzipped.
+    * **With the install complete, close the "Boards Manager" window and select the "Digispark Pro" from the Tools->Boards menu. "Digispark Pro (Default 16mhz)" is the board that should be selected by all new users. **
-  * See the troubleshooting section below for any other issues.
+{{ :digispark:tutorials:pickpro.gif?nolink |}}
-==== :Linux Specific ====
+  *  **The install is now complete!** (Linux users see note below)
-Compile from our github sources or use the beta package here as a starting point: http://digispark.s3.amazonaws.com/digisparkpro_linux.zip (very beta - someone please update?) - Linux beta build compiled by netguy204 - thanks!
-Make sure you installed  lib32stdc.
+==== Linux Install ====
-by issuing: apt-get install lib32stdc++6
+  * If you haven't before - Install the udev rules found here: [[http://digistump.com/wiki/digispark/tutorials/linuxtroubleshooting|Troubleshooting section]]
   * **ATTENTION LINUX USERS:** [[digispark:tutorials:linuxtroubleshooting|PLEASE CHECKOUT THE LINUX TROUBLESHOOTING PAGE**]]
-  * Install the udev rules for the Digispark/Digispark Pro (same rules for both)
-  * Use the udev rules found here: [[http://digistump.com/wiki/digispark/tutorials/linuxtroubleshooting|Troubleshooting section]]
+==== Sources ====
+**Digistump Package Sources: ** https://github.com/digistump/DigistumpArduino
 =====Using the Digispark with the Arduino IDE:=====

Digistump Wiki

User Tools

Site Tools

Differences

Page Tools