====== Oak Starter and Ultimate Parts List ======

Starter Kit Parts List:

  * 3x Oaks
  * 1x Clear Plastic Part Box
  * 1x 400 hole 85x55mm Breadboard
  * 1x 3ft Micro USB Cable
  * 1x Set of 40 M to M 30cm Jumper Wires
  * 1x Set of 40 M to F 30cm Jumper Wires
  * 1x 9g Micro Servo
  * 1x GL5528 Photocell
  * 1x HC-SR04 Ultrasonic Range Module
  * 3x 2N2222 Transistors TO-92
  * 2x 1N4148 Diodes
  * 1x TTP223B Touch Module
  * 1x DS18B20 One Wire Temperature Sensor TO-92
  * 1x 5mm RGB LED Common Cathode
  * 3x 3mm Red LED 
  * 3x 3mm Green LED
  * 3x 3mm Yellow LED
  * 3x 12mm Tactile Button (see image)
  * 1x 3.3v Active Buzzer
  * 10x 150 Ohm ¼W Resistors
  * 10x 10K Ohm ¼W Resistors
  * 10x 4.7K Ohm ¼W Resistors
  * 1x HS0038 IR Receiver
  * 1x QRD1114 IR Interrupter
  * 1x SW-520D Rolling Ball Switch 


The Ultimate Kit includes all of the above, plus:

  * 2x Additional Oaks
  * 1x Digispark/Oak Button Shield
  * 1x Oak TFT LCD Shield
  * 1x DigiLED Shield
  * 1x HC-SR501 PIR Module
  * 1x Breadboard Power Supply Module
  * 1x MC-38 Magnetic Door Switch
  * 1x Soil Moisture Sensor Module Set
  * 1x 9V Battery
  * 1x 9V to Barrel Jack Cable