====== DigiX Product Description ======


==== The ultimate 100% Arduino Due compatible dev board with Wifi and Mesh networking, Audio, USB OTG, microSD, and 99 i/o pins! ====

{{ https://s3.amazonaws.com/digistump-resources/images/l/8dab1ef169626edc7d400ed59a31a18a.jpg |}}


The DigiX has a 32-bit 84 MHz MCU, embedded low power Wi-Fi (b/g/n), optional mesh networking, 99 usable i/o pins, audio output, USB on the go support, onboard EEPROM, onboard microSD slot, built in real time clock, and is 100% compatible with anything that works with the Arduino Due - no adapters, code changes, or special software needed! This is the ultimate Arduino compatible development board, ready for any project!

Here are the specifications:

  * 84 MHz Clock Speed
  * 32-bit ARM Processor (AT91SAM3X8E)
  * On board 802.11b/g/n WiFi Module (FCC/CE Approved)
  * nRF24L01+ socket(not included)
  * On Board MicroSD slot
  * On Board 4KB (32kbit) EEPROM
  * 3.3V, 3.4-5.5V (LiPo Ready), 5V, or 6-16V input (onboard buck regulator)
  * 96KB SRAM
  * 512KB Flash
  * 1A @ 3.3V and 1A @ 5V Available (when powered at 5V+)
  * 99 I/O Pins
  * 12 PWM
  * 12 Analog Input
  * 2 Analog Output (DAC)
  * Onboard LED (connected to Pin 13)
  * 130ma Total Current Output from Processor 


**The DigiX - like the Arduino Due, UDOO, and Spark Core runs at 3.3V. The maximum voltage that the I/O pins can tolerate is 3.3V. Connecting the I/O pins to higher voltages, including 5V, could damage the DigiX.**

Source files can be found on the resources tab of the product page: http://digistump.com/products/50