Please note: Digistump LLC is NOT currently accepting orders. We are taking a hiatus while we change fulfillment locations and focus on delivering our newest project - BuildOne - The $99 3D Printer. We are also temporarily sold out of Digisparks (over 50k sold!). We will return to normal operations and restock in the first quarter of the New Year. Thank you for your continued support!
Little Wire on Digispark Complete Package
$13.95 USD
Availabity:
Out of Stock
Little Wire on Digispark Complete Package
This product includes:
1x Little Wire on Digispark Shield Kit
1x Digispark USB Development Board
Everything you need for a Little Wire pin compatible device, just assembled the shield, load the Little Wire firmware with the easy to use installer and you're all set.
The Little Wire on Digispark Shield Kit provides a Little Wire compatible pinout on the Digispark. This allows the Digispark to be easily used as a Little Wire device, with the Little Wire firmware and libraries. The shield also provide pull-ups for the I2C lines, which can be enabled by an included jumper, and an external power jumper. The kit also includes a 6 pin IDC cable for connecting to other circuits or to standard 6-pin AVR ISP headers for programming AVR chips.
Little Wire is multi-featured USB controlled Open Source Hardware tool packed in a minimal form factor designed by Ihsan Kehribar. The Little Wire for Digispark shield was designed by Ihsan in collaboration with Digistump. The Little Wire firmware can be easily loaded on to a Digispark for use with the Little Wire for Digispark shield.
Little Wire has the following features:
usbtinyisp compatible AVR programmer.
4 channel GPIO.
ADC with 10 bit resolution.
2 parallel hardware PWM outputs.
SPI interface.
I2C interface.
1-Wire interface
WS2812 RGB LED interface.
Multiple device support.
1x Little Wire on Digispark Shield Kit
1x Digispark USB Development Board
Everything you need for a Little Wire pin compatible device, just assembled the shield, load the Little Wire firmware with the easy to use installer and you're all set.
The Little Wire on Digispark Shield Kit provides a Little Wire compatible pinout on the Digispark. This allows the Digispark to be easily used as a Little Wire device, with the Little Wire firmware and libraries. The shield also provide pull-ups for the I2C lines, which can be enabled by an included jumper, and an external power jumper. The kit also includes a 6 pin IDC cable for connecting to other circuits or to standard 6-pin AVR ISP headers for programming AVR chips.
Little Wire is multi-featured USB controlled Open Source Hardware tool packed in a minimal form factor designed by Ihsan Kehribar. The Little Wire for Digispark shield was designed by Ihsan in collaboration with Digistump. The Little Wire firmware can be easily loaded on to a Digispark for use with the Little Wire for Digispark shield.
Little Wire has the following features:
usbtinyisp compatible AVR programmer.
4 channel GPIO.
ADC with 10 bit resolution.
2 parallel hardware PWM outputs.
SPI interface.
I2C interface.
1-Wire interface
WS2812 RGB LED interface.
Multiple device support.
Hardware License:
Datasheet:
Instructions, tutorials, etc:
Software:
Note: Schematics, source files, software, and datasheets are provided rovided "as is", without warranty of any kind, express or implied, including but not limited to the warranties of merchantability, fitness for a particular purpose and noninfringement. in no event shall the authors or copyright holders be liable for any claim, damages or other liability, whether in an action of contract, tort or otherwise, arising from, out of or in connection with the product or the use or other dealings in these products.
