Author Topic: OAK and Arduino  (Read 3923 times)


  • Sr. Member
  • ****
  • Posts: 467
OAK and Arduino
« on: October 10, 2015, 02:17:00 am »
Just wondering if this means there will be "boards manager" settings for the Arduino IDE like digiSparks? Also if the Visual Micro will be a usable tool with OAK? Unless there is a way to wire for uploading there would need to be an OTA upload component.

From Kickstarter campaign text?
"It is even ready to use with Arduino compatible tools like Visual Micro and Ino"

"Click upload in the RootCloud IDE or the Arduino IDE and BAM!"

Would common means like this will work - but that would likely preclude use of the OAK library work found in the and RootCloud implementations and maybe need a different CORE loaded?  Assuming the above tools will have full support for Digistump CORE?
ESP8266 with the Arduino IDE.


  • Newbie
  • *
  • Posts: 5
Re: OAK and Arduino
« Reply #1 on: January 06, 2016, 08:05:34 am »
Any update on Arduino?  I have Arduino already but I can't add this board without some support files.


  • Newbie
  • *
  • Posts: 1
Re: OAK and Arduino
« Reply #2 on: January 07, 2016, 05:43:53 pm »
From here:

"The Oak Platform is not quite ready yet. We project it will be ready for first use on Tuesday Jan 12th.

We apologize for this delay, we felt it was important to ensure that hardware was shipping even if we were still working out a few kinks in the firmware.

Watch here and the Kickstarter comments page ( for updates.

Please do not email us asking for early access to the firmware, updates on the firmware, etc - we will update this page and Kickstarter as soon as it is available.

Thank you for your patience, Erik"