Author Topic: playing with the pro OLED - I got this far  (Read 2341 times)

makerbotspace

  • Newbie
  • *
  • Posts: 5
playing with the pro OLED - I got this far
« on: December 02, 2014, 11:08:51 pm »
// Demo by Makerbotspace
// While clear is not working filling the display with spaces will

#include <Arduino.h>
#include <Wire.h>
#include <MicroLCDpro.h>

extern int8_t rst_RST;   // BUGBUG: pull from library the reset pin number
//LCD_SH1106 lcd; /* for SH1106 OLED module */
LCD_SSD1306 lcd; /* for SSD1306 OLED module */

void setup()
{

  lcd.begin();

  lcd.clear(); // makes a buch of dots?
 
 
  // Cheat print to the entire screen making it "clear"
  lcd.setFontSize(FONT_SIZE_SMALL);
  lcd.println("                                                                                                                                                                           ");
  //lcd.setFontSize(FONT_SIZE_LARGE);
  lcd.setCursor(0, 0);
  lcd.println("Time waits for No Man");
  lcd.println("");
  lcd.setFontSize(FONT_SIZE_LARGE);
  lcd.println("    Tuesday");
  lcd.println("   10:45 PM");
  lcd.println("  Dec 2 2014");
}


void loop()
{
 
 
 

  delay(60000);
}