Author Topic: DigiX Pinout documentation  (Read 46165 times)

gogol

  • Sr. Member
  • ****
  • Posts: 398
Re: DigiX Pinout documentation
« Reply #30 on: January 27, 2014, 08:57:00 am »
0.6.2 added to the initial post.
Additions:  JTAG and Ethernet-PHY Pins marked

gogol

  • Sr. Member
  • ****
  • Posts: 398
Re: DigiX Pinout documentation
« Reply #31 on: February 10, 2014, 07:12:29 am »
attached Version 0.7 to the very first post

  • corrected PWM4 assigment
  • added reason for crossconnected pins
  • added PC0 information to ERASE
  • added AD15 information about temp sensor
« Last Edit: February 10, 2014, 07:15:12 am by gogol »

gogol

  • Sr. Member
  • ****
  • Posts: 398
Re: DigiX Pinout documentation
« Reply #32 on: February 27, 2014, 07:08:24 am »
attached Version 0.8 to the very first post.
  • Information of Wifi-Modul
  • JTAG-pins of Wifi module marked
  • design changes

gogol

  • Sr. Member
  • ****
  • Posts: 398
Re: DigiX Pinout documentation
« Reply #33 on: March 07, 2014, 08:50:01 am »
attached Version 0.9 to the very first post.
  • added solder jumper information, location, name, purpose, default setting

tastewar

  • Jr. Member
  • **
  • Posts: 50
Re: DigiX Pinout documentation
« Reply #34 on: March 07, 2014, 07:58:15 pm »
Thanks for all this! One quick question from glancing at the doc. You state:

UART TX1 connected to WiFI RX (WiFi-P39)
UART RX1 connected to WiFI RX (WiFi-P41)

Shouldn't one of those say WiFI TX (I'm guessing UART RX1)

gogol

  • Sr. Member
  • ****
  • Posts: 398
Re: DigiX Pinout documentation
« Reply #35 on: March 09, 2014, 01:49:09 am »
Thanks for all this! One quick question from glancing at the doc. You state:

UART TX1 connected to WiFI RX (WiFi-P39)
UART RX1 connected to WiFI RX (WiFi-P41)

Shouldn't one of those say WiFI TX (I'm guessing UART RX1)

Thanks for pointing that out!  I fixed it and uploaded a version 0.9.1 to the very first page!

@All users of this diagram: Whenever you see unclear/wrong/missing information, drop a short note here!  Quality can only be reached, when more eyes are watching!

gogol

  • Sr. Member
  • ****
  • Posts: 398
DigiX Pinout documentation 0.9.5
« Reply #36 on: March 20, 2014, 04:30:01 am »
Attached version 0.9.5 to the very first post.
Changes:
  • minor layout corrections
  • wifi enable-jumper
  • on-board LED
  • form-fields for pin annotations

The biggest change is almost hidden: When opening with Adobe Reader click to "Highlight Existing Fields" in the top-right corner.
I have embedded text fields to almost every pin, which is invisible, as long as no information is entered.
However, as soon, as you enter your own project depending description, the text-field is visible and covers the basic pin information.

When you delete content of such an text field, the field disappears again.

« Last Edit: March 20, 2014, 04:36:18 am by gogol »

gogol

  • Sr. Member
  • ****
  • Posts: 398
DigiX Pinout documentation: YOUR FEEDBACK ?
« Reply #37 on: March 24, 2014, 02:31:14 am »
Has someone tried the form fields for own project documentation?
Is that usable or just my own nerdy idea?

How are you documenting own projects, which have a lot of connections? 

gogol

  • Sr. Member
  • ****
  • Posts: 398
Re: DigiX Pinout documentation
« Reply #38 on: May 12, 2014, 06:28:29 am »
Attached version 0.9.7 to the very first post.
  • minor layout changes
  • added eeprom

Anybody here, who is really using this?

digistump

  • Administrator
  • Hero Member
  • *****
  • Posts: 1465
Re: DigiX Pinout documentation
« Reply #39 on: May 12, 2014, 09:41:46 pm »
I use it constantly!

And the wiki page with a copy of it (which I will update now) is one of the most accessed.

Thanks for maintaining this!

defragster

  • Sr. Member
  • ****
  • Posts: 467
Re: DigiX Pinout documentation
« Reply #40 on: May 16, 2014, 11:48:26 pm »
good+=1

gogol

  • Sr. Member
  • ****
  • Posts: 398
Re: DigiX Pinout documentation
« Reply #41 on: May 19, 2014, 01:13:19 am »
Feedback is always welcome. From my point of view, it should be now almost complete to leave the "beta" phase. However I am not sure, if there are still some quirks, cut&paste errors or other problems.
Getting an idea, how many users haven't seen any mistake during their use, will also help.

gogol

  • Sr. Member
  • ****
  • Posts: 398
Re: DigiX Pinout documentation
« Reply #42 on: May 26, 2014, 01:07:19 am »
Attached version 0.98 to the very first post!

Added information, that DigiX-pins are 3.3V only.


kd7eir

  • Newbie
  • *
  • Posts: 17
Re: DigiX Pinout documentation
« Reply #43 on: May 30, 2014, 08:40:26 am »
Thank you for the update and for all the incredibly hard work you put into maintaining this great resource.

gogol

  • Sr. Member
  • ****
  • Posts: 398
Re: DigiX Pinout documentation
« Reply #44 on: June 10, 2014, 01:03:06 am »
Updated the version, included buck-regulator information from thread: http://digistump.com/board/index.php/topic,1432.0.html
See first post in this thread!