Digistump Forums

The Digispark => Digispark (Original) Support => Topic started by: logorgb99 on April 17, 2019, 04:54:34 am

Title: Issue about spark-Digi
Post by: logorgb99 on April 17, 2019, 04:54:34 am
Hi , all
I am using Arduino 1.6.5 on a Windows 10 laptop and cannot get this message to go away when I try to upload the start example:
แทงบอลออนไลน์UFABET (https://www.ufa365.com/)
avrdude: usbdev_open(): did not find any USB device "usb"

I've tried Arduino 1.8.5 and cannot get this message to go away either:

'C:\Users\Nathan' is not recognized as an internal or external command,
operable program or batch file.
The system cannot find the path specified.

I am a new Arduino user trying to flash a simple LED program. I have updated the drivers. Any help would be appreciated.

Thank in advance.
Title: Re: Issue about spark-Digi
Post by: granzeier on April 18, 2019, 03:35:32 am
It sounds like you may be getting some things confused with Linux. The Windows system should be trying to write to a COM port (COM1, COM2, etc.) and not a USB port. Have you downloaded the version for Windows? Also, have you installed the driver for the Arduino?