Digistump Forums

The Digispark => Digispark (Original) Support => Topic started by: Dongky18 on April 11, 2019, 03:05:28 am

Title: Problem about driver.
Post by: Dongky18 on April 11, 2019, 03:05:28 am
I get this message when I try to upload on my digispark :
UFABET (https://www.ufa365.com/)
Code: [Select]
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.
> Please plug in the device
> Press CTRL+C to terminate the program.



I'm running v1.6.5 IDE on windows 10
My arduino nano works perfectly.
Title: Re: Problem about driver.
Post by: granzeier on April 12, 2019, 03:32:02 am
We need a bit more information...

One big difference between the Digispark and the Nano is that, with the Digispark, you need to leave it unplugged until the downloader tells you to plug it in (after the IDE compiles the sketch.) The Digispark must be manually reset in order for the bootloader to read the new program from the computer. The Nano has the reset available through the USB interface, and does not need that.

Did you wait for the bootloader's notice to plug in the Digispark?