Digistump Forums

The Digispark => Digispark (Original) Support => Topic started by: redridinghood74 on October 14, 2017, 07:47:53 am

Title: 8Mhz (no usb) reset vs 1mhz
Post by: redridinghood74 on October 14, 2017, 07:47:53 am

Code: [Select]

byte i;
void(* softreset) (void) = 0;
void setup() {
  //pinMode(1, OUTPUT);
  DDRB |= (1 << PB1);
}
void loop() {
  PORTB ^= (1 << PB1); //Toggle PB1 1XOR1=0 1XOR0=1
  delay(i); //160bytes
  i++;
  if (i >= 127) {
    softreset();
  }
}
On 8mhz this works on 1mhz it locks up (Original Digispark v1.11)

On clone both speeds work (v1.11)

Can i dump the clone firmware & upload with micronucleus ?