Digistump Forums

The Digispark => Digispark Pro Support => Topic started by: lameboyadvance on November 30, 2015, 01:53:11 pm

Title: The Eagle files provided for the Digispark Pro are incomplete
Post by: lameboyadvance on November 30, 2015, 01:53:11 pm

I just downloaded the Eagle board/schematic files provided for the Pro from the site (http://digistump.com/getpro#product_resources) with the intention of changing the USB connector. When first opened, the board file is the mess as shown below:(http://i.imgur.com/FpS6kzR.gif)

Once cleaned up, it becomes evident that there are a lot of incomplete/missing traces on the board, as shown by the purple lines below:(http://i.imgur.com/DrCmQT2.gif)

Is this intentional, or was an earlier/incomplete copy of the board uploaded by mistake?

Title: Re: The Eagle files provided for the Digispark Pro are incomplete
Post by: digistump on April 08, 2016, 01:19:34 pm

You deleted the GND pour when you "cleaned it up" - the GND pour made those connections - just turn off the layers you don't want to see rather than deleting things.

Title: Re: The Eagle files provided for the Digispark Pro are incomplete
Post by: supuflounder on October 08, 2016, 02:03:48 am

They are incomplete in another way.  What are the values for R1 and R2?
   |><>   
   joe