Digistump Forums

The Digispark => Digispark Projects => Topic started by: Len Cooper on January 16, 2015, 07:37:53 am

Title: Tiny85 radio control speed control
Post by: Len Cooper on January 16, 2015, 07:37:53 am

This may not be the most elegant design but it works. R1 & D3 are not required if the input pulse is  5 volts or less.

Title: Re: Tiny85 radio control speed control
Post by: RC Navy on January 16, 2015, 10:11:09 am

Hi,

the sketch Tiny85_rcu.ino doesn't match with you schematic: it prints hello world from Infra red commands!

Title: Re: Tiny85 radio control speed control
Post by: Len Cooper on January 17, 2015, 05:44:14 am

Thanks for the heads up, some of my files appear to have got moved about.
The correct file has now been attached (I hope!).
Please forgive a novice at this forum business.

Title: Re: Tiny85 radio control speed control
Post by: RC Navy on January 17, 2015, 06:12:18 am

Hi,

Quote

Please forgive a novice at this forum business.

Never mind: errare humanum est.
Now the sketch is in phase with the schematic, that's important for the forum readers.
Digispark are well dimensioned for such an usage.

Have fun!!!