Digistump Forums

The DigiX => DigiX Projects => Topic started by: dfarrell on March 03, 2014, 06:41:58 am

Title: DigiX clean schematic
Post by: dfarrell on March 03, 2014, 06:41:58 am

I have started a Due / DigiX area on my gighub, see https://github.com/djfarrell/DueDigiX.  Right now it holds only a cleaned up schematic of the DigiX board.  Hopefully soon I will put up my ethernet and fpga stuff.

Title: Re: DigiX clean schematic
Post by: gogol on March 03, 2014, 07:31:01 am

Thanks, that looks perfect! I wished, that this was available, when I started my pinout documentation!

Title: Re: DigiX clean schematic
Post by: gogol on March 04, 2014, 12:08:01 am

Hi,
can you mark the Solder Jumpers, which are closed by default as closed?  I think, that this would help a lot.
As far as I know, SJ1, SJ6 and SJ7 are connected by default.  But that needs to be double checked.

Title: Re: DigiX clean schematic
Post by: dfarrell on March 08, 2014, 06:47:53 pm

May be better to just edit the png file.  While I downloaded eagle 6.5 to clean this, there seems to be a jumble of libraries the parts were pulled from (which I don't care to hunt down) so I don't want to edit any connectivity things without being able to do a electrical check.

Title: Re: DigiX clean schematic
Post by: gogol on March 09, 2014, 03:22:10 am

I have included this information into my Pin documentation, together with pictures of the real solder jumpers.
That way identification should be much easier.