Digistump Forums

The DigiX => DigiX Support => Topic started by: a9k on November 06, 2013, 06:58:34 pm

Title: Mac OS X install
Post by: a9k on November 06, 2013, 06:58:34 pm

The Wiki instructions didn't work for me - there was no sign DigiX in the Arduino Board menu. Tried taking folders out of folder (still within Docs/Arduino) with no joy.

Here's the steps I went through to finally get DigiX to show up in the board menu.
-- Notes on installing DigiX on Mac Arduino 1.5.4
• Part 1

• Unpack DigiXAddons-v04.zip file on deskup.
• Double click DigiXAddons-v04 to open the folder.
• Doube click "hardware" to open that folder; inside you should see "digistump".

• Part 2

• Put Arduino application (1.5ish version) on desktop.
• Control click the Arduino application
• Select Show Package Contents
• Double click "Contents" folder.
• Double click "Resources" folder.
• Double click "Java" folder.
• Double click "hardware" folder

• Part 3

• Drag "digistump" folder from Part 1 to the open "hardware" folder from Part 2.

Hope this helps other mac users.

Title: Re: Mac OS X install
Post by: contractorwolf on November 25, 2013, 05:53:46 pm

the hardware folder in the DigiXAddOns download needs to be put in the Documents/Arduino/ folder and the folders inside the libaries folder (from the download) need to be in the Documents/Arduino/Libraries folder. I hit the same issue, they need to fix that wiki, you dont need new people to be hitting a roadblock right out of the gate.

Title: Re: Mac OS X install
Post by: contractorwolf on November 25, 2013, 05:59:53 pm

i just went and updated the wiki myself, admins please verify that my changes are in fact accurate for all