The Digispark > Digispark (Original) Support

Issue programming Digispark

(1/2) > >>

sebi:
Dear community,
I used to be able to program my Digisparks, but currently I don't have them anymore to try reprogramming them as they are used in projects I gave away.
In the meantime I got 2 new ones but I am unable to program them using the Arduino IDE as before.
I re-followed some tutorials on the internet to make sure the driver was still installed successfully on my Windows 10 computer.
When I click on upload in the Arduino IDE I get:
Running Digispark Uploader...
Plug in device now... (will timeout in 60 seconds)
And it is written Done uploading in the status bar.
But nothing gets uploaded.
I tried to run C:\Users\sebi\AppData\Local\Arduino15\packages\digistump\tools\micronucleus\2.0a4/launcher -cdigispark --timeout 60 -Uflash:w:C:\Users\sebi\AppData\Local\Temp\arduino_build_606253/DigiSpark_test.ino.hex:i directly in the command line and after a second or 2 I got the next command prompt, the Digispark being plugged in or not.
In doubt, I reflashed the bootlaoder Micronucleus v2.0a4 on a Digispark using an Arduino Uno but it didn't help.
Do you have any clue what my issue could be? Thanks.

granzeier:
Try using a hub - powered is supposed to be preferable, but I have had success with a non-powered one.

sebi:
I tried but it didn't help.
What is weird is that when I run launcher -cdigispark --timeout 60 -Uflash:w:C:\test.ino.hex:i directly in the command line (which is what the Arduino IDE does), the command exits after a second or 2 without any error message, the Digispark being plugged in or not.
It is like this command doesn't work anymore.
Is there a verbose option that would give me more hints?

sebi:
Some more description about my issue:
When clicking on Upload in the Arduino IDE, after my code is done being compiled, I get this

...switching from Uploading... to Done uploading. after a second or two, the Digispark being plugged (at the right time) or not.

granzeier:
Yes, I have gotten that many times, but the fix for it has been using a cheap unpowered hub (after seeing a post from Digistump about using a hub.)
You are leaving the Digispark unplugged until the message about plugging it in, right?

Navigation

[0] Message Index

[#] Next page