Author Topic: Wireless data logger (Read 8308 times)

AGreenV5 · « **on:** August 17, 2012, 11:38:01 am »

I'd like to see a wireless shield to use these for wireless data logging. You could do bluetooth, or some of the wireless chips on sparkfun.

I've also got an idea to see if I can make these work with a digital picture frame, to "wireless enable" the frame.

sparr · « **Reply #1 on:** August 17, 2012, 01:34:44 pm »

An xbee board like http://microcontrollershop.com/product_info.php?products_id=2366 could work, but you\'d use up almost all the pins to do it.

makubik · « **Reply #2 on:** August 17, 2012, 05:19:04 pm »

Id also like to see a wireless transceiver shield, based on something like a nRF2401A
and/or 433/434 MHz

Tamsyn · « **Reply #3 on:** August 17, 2012, 07:11:58 pm »

Me too makubik. A Bluetooth shield would also be awesome!

fraguada · « **Reply #4 on:** August 18, 2012, 02:34:39 am »

I would def go for an RFM12b shield! Would interface nicely with the Jeenode and Air Quality Egg ecosystem...

martin · « **Reply #5 on:** August 21, 2012, 12:58:54 pm »

Have you seen the Funky? Already has RFM12B, Attiny84 based and smaller than digispark... beat this.

http://tobiscorner.floery.net/funky/funky/

sparr · « **Reply #6 on:** August 21, 2012, 01:43:21 pm »

martin, funky is bigger than digispark by a few mm in both directions

digistump · « **Reply #7 on:** August 24, 2012, 05:43:56 pm »

RFM12b shield PCB is coming!

smithincanton · « **Reply #8 on:** August 28, 2012, 08:04:05 am »

Awesome! Ordered two. You guys really need to stop adding stuff, my pledge is up to $90 bucks!